Two-dimensional magneto-thermoelastic interactions in a micropolar functionally graded solid

Abstract

The present work is concerned with the 2D deformation in a nonhomogeneous, isotropic, micropolar, magneto-thermoelastic medium in the context of Lord-Shulman theory as a result of an inclined load. The inclined load is supposed to be a linear combination of normal load and tangential load. Material properties are assumed to be graded in x-direction. Normal mode technique is proposed to obtain the analytical expressions for the temperature field, displacement components, and stresses. These are also calculated numerically and depicted graphically to observe the variations of the considered physical variables.

Communicated by Seonho Cho.     

A study on the spectral,microstructural, and magnetic properties of Eu–Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites synthesized by an ultrasonic-assisted approach

In this study, an examination on the spectral, microstructural, and magnetic characteristics of Eu–Nd double-substituted Ba_0.5Sr_0.5Fe₁₂O₁₉ hexaferrites (Ba_0.5Sr_0.5Nd_xEu_xFe_12−2xO₁₉ (x = 0.00–0.05) HFs) fabricated by an ultrasonic-assisted approach has been presented. An UZ SONOPULS HD 2070 ultrasonic homogenizer with frequency of 20 kHz and power of 70 W was used. The chemical bonding, structure and the morphology of the products were evaluated by Fourier-Transform Infrared (FT-IR) Spectroscopy, XRD (X-ray diffraction), scanning and transmission electron microscopy and techniques. The textural properties of the prepared nanomaterials were examined by using the Brunauer-Emmett-Teller (BET) method. The magnetic properties were studied using a vibrating sample magnetometer (VSM) at room temperature (RT) and low temperature 10 K. The magnitudes of various magnetic parameters including M_s (saturation magnetization), M_r (remanence) and H_c (coercivity) were estimated and evaluated. The M-H loops revealed the hard ferrimagnetic nature for all products at both temperatures. The M_s and M_r values showed a decreasing tendency with increasing degree of Eu³⁺ and Nd³⁺ substitutions whereas H_c values displayed an increasing trend. At RT, M_s, M_r and H_c values lie in the ranges of 63.0–68.8 emu·g⁻¹, 24.6–39.2 emu·g⁻¹ and 2252.4–2782.1 Oe, respectively. At 10 K, the values of M_s, M_r and H_c lie between 87.5–97.1 emu·g⁻¹, 33.5–40.1 emu·g⁻¹ and 2060.6–2417.2 Oe, respectively. The observed magnetic properties make the prepared products promising candidates to be applied in the recording media.     

Preparation of two-dimensional molybdenum disulfide for NO2 detection at room temperature

In this work, the two-dimensional MoS₂ film was prepared by sulfuring the molybdenum atomic layer on SiO₂/Si substrate. The reaction temperature, heating rate, holding time and carrier gas flow rate were investigated comprehensively. The quality of MoS₂ film was characterized by optical microscopy, atomic force microscopy, Raman and photoluminescence spectroscopy. The characterization results showed that the optimum synthesis parameters were heating rate of 25 °C/min, reaction temperature of 750 °C, holding time of 30 min and carrier gas velocity of 100 sccm. The MoS₂ gas sensor was fabricated and its gas sensing performance was tested. The test results indicated that the sensor had a good response to both reducing gas (NH₃) and oxidizing gas (NO₂) at room temperature. The sensitivity to 100 ppm of NO₂ was 31.3%, and the response/recovery times were 4 s and 5 s, respectively. In addition, the limit of detection could be as low as 1 ppm. This work helps us to develop low power and integrable room temperature NO₂ sensors.     

小实验大道理 ——从热缩片小制品DIY看高分子材料的熵致形变

A little experiment concerning the pyrocondensation materials was introduced in this paper. The aim was to help the public understand the principles of entropy induced deformation of polymer materials.     

The covalent functionalization of few-layered MoTe2 thin films with iodonium salts

Covalent functionalization of 2D materials provides a tailored approach towards tuning of their chemical, optical, and electronic properties making the search for new ways to graft small molecules important. Herein, the reaction with (3,5-bis(trifluoromethyl)phenyl)iodonium salt is revealed as an effective strategy for functionalization of MoTe₂ thin films. Upon decomposition of the salt, the generated radicals graft covalently as aryl-(CF₃)₂ groups at the surface of both metallic (1T’) and semiconducting (2H) polymorphs of MoTe₂. Remarkably, the reactivity of the salt is governed by the electronic structure of the given polymorph. While the functionalization of the metallic MoTe₂ occurs spontaneously, the semiconducting MoTe₂ requires activation by light. The reaction proceeds with the elimination of oxide from the original films yielding the functionalized products that remain protected in ambient conditions, presenting a viable solution to the ageing of MoTe₂ in air.     

Double-Shelled C@MoS2 Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

The growth of Li dendrites hinders the practical application of lithium metal anodes (LMAs). In this work, a hollow nanostructure, based on hierarchical MoS₂ coated hollow carbon particles preloaded with sulfur (C@MoS₂/S), was designed to modify the LMA. The C@MoS₂ hollow nanostructures serve as a good scaffold for repeated Li plating/stripping. More importantly, the encapsulated sulfur could gradually release lithium polysulfides during the Li plating/stripping, acting as an effective additive to promote the formation of a mosaic solid electrolyte interphase layer embedded with crystalline hybrid lithium-based components. These two factors together effectively suppress the growth of Li dendrites. The as-modified LMA shows a high Coulombic efficiency of 98 % over 500 cycles at the current density of 1 mA cm⁻². When matched with a LiFePO₄ cathode, the assembled full cell displays a highly improved cycle life of 300 cycles, implying the feasibility of the proposed LMA.     

基于侧向磁泳的微流控芯片对两种磁性纳米球的同时分选

基于磁性纳米球在微流控芯片上的侧向磁泳, 利用微流控芯片分选了不同磁响应性的磁球. 提出了包含磁性纳米球聚集与偏移的理论模型, 用于分析磁球在芯片上的侧向位移. 在理论分析的基础上设计了芯片系统, 使不同磁响应性的磁纳米球可以在芯片系统上依次被分选. 实验结果表明, 2种磁性纳米球的分选效率均可接受, 且实验操作简单; 磁响应性强的磁球可被完全分离, 这对于珍贵分析样品的分选很有价值. 该分选系统被成功用于同时分选样品中乙型肝炎病毒的DNA与丙型肝炎病毒的反转录DNA, 在生化分析中具有广阔的应用前景.     

Crystallization-Driven Asymmetric Helical Assembly of Conjugated Block Copolymers and the Aggregation Induced White-light Emission and Circularly Polarized Luminescence

Controlling the self-assembly morphology of π-conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3-hexylthiophene)-block-poly(phenyl isocyanide)s (P3HT-b-PPI) copolymers composed of π-conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization-driven asymmetric self-assembly (CDASA) of the block copolymers lead to the formation of single-handed helical nanofibers with controlled length, narrow dispersity, and well-defined helicity. During the self-assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single-handed helical assemblies of the block copolymers exhibited interesting white-light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.     

Optimization of Active Sites via Crystal Phase,Composition, and Morphology for Efficient Low-Iridium Oxygen Evolution Catalysts

Reducing the amount of iridium in oxygen evolution electrocatalysts without compromising their catalytic performances is one of the major requirements in proton-exchange-membrane water electrolyzers. Herein, with the help of theoretical studies, we show that anatase-type TiO₂-IrO₂ solid solutions possess more active iridium catalytic sites for the oxygen evolution reaction (OER) than IrO₂, the benchmark OER catalyst. Note that the same is not observed for their rutile-type counterparts. However, owing to their thermodynamic metastability, anatase-type TiO₂-IrO₂ solid solutions are generally hard to synthesize. Our theoretical studies demonstrate that such catalytically active anatase-type solid-solution phases can be created in situ on the surfaces of readily available SrTiO₃-SrIrO₃ solid solutions during electrocatalysis in acidic solution as the solution can etch away Sr atoms. We experimentally show this with porous SrTiO₃-SrIrO₃ solid-solution nanotubes synthesized by a facile synthetic route that contain 56 % less iridium than IrO₂ yet show an order of magnitude higher apparent catalytic activity for OER in acidic solution.